您好,欢迎您来到:金沙澳门登陆网站官网!服务热线:0512-62751429.
YUSH Electronic
资讯动态
depaneling machine Multi knife depaneling safe High efficiency reasons
  1. because the amount of each cut is small, and thus cut the incidence of stress compared to the traditional process of a method to intercept decreased by more than 80% of stress, good cutting board flat, smooth margin, the board is flat, not twisted is not Alice. Now the market is only down the plate to ensure that sub-board machine cut after the aluminum does not deform.

2. simple operation, fast speed. The machine uses a common single V groove boards even more ways to cut, cut the board by the end of the three groups of blades, two up and down as a group to form a cutting unit group. Are A, B, C, the three groups. All cutting process is divided into three periods, A set of blades to cut the V-groove boards of some 40%, followed by B from A blade blade again cut off tank run over, once again the end of the V-grooves cut some 40% amount, and ultimately by the final group C blade cut 20% and wiper.

3. because the reason repeatedly cut, cut a very smooth process, greatly improving the V-CUT groove to locate, even if V-CUT very shallow groove boards, cut aluminum does not deform the same, to prevent the occurrence of adverse.


4. because the small blade cutting force, and the use of imported high-speed steel materials, greatly improve the durability of the blade, cutting blade aluminum plate life of up to three years. Blade conditioning simple convenience, without having to rely on tools, hand can easily separate numeric conditioning, power production progress. Planning concept of humanity.

5. the device is equipped with a stepless speed control device, control speed composure, plus installation Reversible control knob, emergency stop button, power production progress.

6.  can be repeatedly turned round knife grinding again, saving production costs.
YUSH Electronic Technology Co.,Ltd - Multitool Depaneling ,PCB separator / PCB LED boards fr4 separator / depanel machine / pcb depanelizer / smt depanel cutter / circuit board router / PCB Cutting Machine
产品分类

                                  depaneling machine Multi knife depaneling safe High efficiency reasons


                                    1. because the amount of each cut is small, and thus cut the incidence of stress compared to the traditional process of a method to intercept decreased by more than 80% of stress, good cutting board flat, smooth margin, the board is flat, not twisted is not Alice. Now the market is only down the plate to ensure that sub-board machine cut after the aluminum does not deform.

                                  2. simple operation, fast speed. The machine uses a common single V groove boards even more ways to cut, cut the board by the end of the three groups of blades, two up and down as a group to form a cutting unit group. Are A, B, C, the three groups. All cutting process is divided into three periods, A set of blades to cut the V-groove boards of some 40%, followed by B from A blade blade again cut off tank run over, once again the end of the V-grooves cut some 40% amount, and ultimately by the final group C blade cut 20% and wiper.

                                  3. because the reason repeatedly cut, cut a very smooth process, greatly improving the V-CUT groove to locate, even if V-CUT very shallow groove boards, cut aluminum does not deform the same, to prevent the occurrence of adverse.


                                  4. because the small blade cutting force, and the use of imported high-speed steel materials, greatly improve the durability of the blade, cutting blade aluminum plate life of up to three years. Blade conditioning simple convenience, without having to rely on tools, hand can easily separate numeric conditioning, power production progress. Planning concept of humanity.

                                  5. the device is equipped with a stepless speed control device, control speed composure, plus installation Reversible control knob, emergency stop button, power production progress.

                                  6.  can be repeatedly turned round knife grinding again, saving production costs.
                                  YUSH Electronic Technology Co.,Ltd - Multitool Depaneling ,PCB separator / PCB LED boards fr4 separator / depanel machine / pcb depanelizer / smt depanel cutter / circuit board router / PCB Cutting Machine
                                  金沙澳门登陆网站 版权所有 @ Copyright 2015 联系人:刘小姐 地址:江苏省苏州市昆山市金阳东路1068号G栋厂房, 分板机宇顺力专业生产V-CUT分板机|电路板分板机|邮票孔分板机|pcb气动分板机|分板机厂家|线路板分板机|冲压分板机|铡刀分板机|PCB数控分板机|PCB曲线分板机|上海分板机|分板机刀具|分板机配件|FPC冲床分板机|LED铝基板分板机。《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备14049770号-4
                                  联系金沙澳门登陆网站
                                  分板机华南地址:
                                  分板机地址:广东省东莞市涌头村山泉路十号(总部)
                                  分板机咨询:13862072520
                                  分板机电话:0769-88087410
                                  分板机网址:
                                  华东分板机地址:
                                  分板机地址:江苏省苏州市昆山市金阳东路1068号(国瑞产业园)
                                  分板机电话:0512-62751429
                                  咨询分板机:13450659407
                                  分板机邮箱:evaliu@hk-yush.com
                                  分板机网址:http://www.yushunli.com
                                  金沙澳门登陆网站 版权所有 @ Copyright 2015 联系人:刘小姐 地址:江苏省苏州市昆山市金阳东路1068号G栋厂房, 分板机宇顺力专业生产V-CUT分板机|电路板分板机|邮票孔分板机|pcb气动分板机|分板机厂家|线路板分板机|冲压分板机|铡刀分板机|PCB数控分板机|PCB曲线分板机|上海分板机|分板机刀具|分板机配件|FPC冲床分板机|LED铝基板分板机。《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备14049770号-4
                                  XML 地图 | Sitemap 地图